| • The exterior of the George Park RiverPool® is constructed of 12 panels that bolt together on site. The George Park RiverPool® panels are constructed of heavy 14-gauge powder coated steel. Once bolted together the George Park RiverPool® is free-standing, thus allowing for easy installation in almost any application. |
| • The interior of the George Park RiverPool® is lined with a rugged PVC membrane liner. The liner is smooth and soft to the touch. The PVC liner bottom rests on a 1" thick insulation board thus providing a more comfortable surface for you to stand and also insulating the floor of the George Park RiverPool®. |
| • The George Park RiverPool® liner is 28-mil's thick, 50% thicker than the liners used in a standard swimming pool. The liner is durable enough to withstand normal jabs and pokes, but sharp objects like broken glass can puncture it. Should this occur, the liner can be patched with an inexpensive patch kit without draining your George Park RiverPool® The liner is warranted for 15 years (not 10 as in some other brands) against structural defects. |
| • The water propulsion system and underwater perimeter return channel benches installed inside the George Park RiverPool® frame are constructed of the highest quality 18 gauge 316 L Stainless Steel. |
| • Site Requirements: Solid, level floor, capable of supporting 200 lbs. per sq. ft. Can be installed above-ground, partially above-ground, or completely in-ground. |
| • Power Requirements: |
| 220 volts, 30 amps (GFCI) 5 HP or 7-1/2 HP Motor |
| 220 volt, 30 amps (GFCI) 5.5. kw heater |
| 220 volt, 15 amps (GFCI) 3/4 re circulating motor |
|
